By Jim McGowan & Kelvin Dodd
(click here for pictures)
It’s very quiet, works day and night, and eventually turns your valuable parts into flaky, brown powder. They say that rust never sleeps (unlike some of our restoration projects), and this demon is the enemy of almost all metals on the planet. But it can be prevented and controlled. Inspecting the undercarriage, engine compartment, trunk, and other known areas of your vehicle for rust spots is a great pro-active means of detection. Also, using Moss Motors’ extensive line of original-color paint products to touch up bare metal spots will prevent rust from forming. Remember the old adage, “The best defense is a carefully planned offense!”
Even though we might not drive our cars during the winter months or in the rain, rust somehow finds them nonetheless. Once discovered, rust must be dealt with immediately or you’ll have to face the consequences. Many “de-rusting” products on the market can be brushed on, sprayed on, blasted on, and more, but some can be caustic, distort the surface of the metal, or only seal the rust beneath the product. Plus, many times these products are harmful to the environment and you.
International armed forces face a huge rust problem with the number of vehicles that have to be maintained. Trucks, tanks, and Humvees all rust, and it must be quickly dealt with to preserve the metal’s integrity. Luckily, a rust-busting product called Evapo-Rust—originally developed for the military—is now available to the public. It’s a non-caustic liquid that is sewerable in “neat” (uncontaminated) form and literally dissolves rust.
We decided to try the solution on carefully cleaned parts that had been set aside and forgotten in a coastal climate. Salty fog ushered in the rust fairy, and every exposed bit of tin and cast iron became refuge for the dreaded ferrous-oxide beast. Instead of using the wire wheel and removing fingerprints from their source in the process or bead-blasting (great for exterior rust but can pit and scar internal engine parts), we gave the parts an Evapo-Rust bath.
Simply submerge the entire part(s) in a container of Evapo-Rust and let it sit. Small parts should be checked every 30 minutes, and soak times will vary up to 24-48 hours depending on the severity of the rust. Evapo-Rust is water-based, biodegradable, and has an indefinite shelf life. One gallon will remove ½ -pound of pure dry rust or will de-rust up to 300 pounds of steel.
We had some light rust dust and some serious corrosion on a variety of Brit parts—Evapo-Rust easily crosses international boundaries when it comes to rust destruction. It will de-rust a barn-buried Jag, your dormant MG, or even a Sherman tank. Following the simple instructions on the container yielded excellent results, and we didn’t have to leave home to do it. Since Evapo-Rust is non-hazardous, it can be shipped U.S. Postal, UPS, or regular freight.
Evapo-Rust isn’t any good for rusted rocker panels, but if you have parts or tools that can be dipped, it’s worth adding to your list of shop supplies. Think of all the hours spent hunkered over a wire wheel or squinting into a blasting cabinet when you could’ve just plopped the parts in a tank, then cleaned ’em up with water. Evapo-Rust is available in 1-gallon jugs, 5-gallon tubs, and 55-gallon drums that contain 35 gallons of solution—ready to go for submerging large parts. Now if we can just figure out how to submerse a rusty MGC up to its beltline…